Ga door naar hoofdinhoud

Reemplazo de la tapa trasera del Kobo Libra Colour

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 1 van 3 Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 2 van 3 Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Flip your eReader over so the screen is facing down.

  • Angle an opening pick straight down, and insert its tip under the top right corner of the back cover, near the power button.

  • Push downward and pry up with the pick until you feel it slide between one of the clips and the frame.

  • You may have to test a few spots along the corner until the pick slides between one of the clips.

Dale la vuelta a tu eReader para que la pantalla quede hacia abajo.

Coloca una púa de apertura en ángulo recto hacia abajo e inserta su punta bajo la esquina superior derecha de la cubierta trasera, cerca del botón de encendido.

Empuja hacia abajo y haz palanca con la púa hasta que notes que se desliza entre uno de los clips y el marco.

Puede que tengas que hacer varias pruebas a lo largo de la esquina hasta que la púa se deslice entre uno de los clips.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.