Repareer je spullen Gemeenschap Winkel

Hoe een soldeerbrug te verhelpen

Terug naar de handleiding
Engels
Nederlands
Stap 5
How to Fix a Solder Bridge, Clean the soldering iron: stap 0, afbeelding 1 van 3 How to Fix a Solder Bridge, Clean the soldering iron: stap 0, afbeelding 2 van 3 How to Fix a Solder Bridge, Clean the soldering iron: stap 0, afbeelding 3 van 3
Clean the soldering iron

  • The soldering iron tip will be very hot! Be careful when handling the soldering iron during its operation.

  • Hold down the damp sponge.

  • Use a damp sponge not a wet sponge so it won't burn. Also make sure the sponge is made from a cellulose material not a polymer. You don't want the sponge to melt and mess up your iron.

  • While the soldering iron is hot, use a rubbing motion across the sponge to remove excess solder off the soldering iron tip.

  • When you have cleaned the iron, melt a small amount of solder on it to "re-tin" the tip.

De soldeerbout schoonmaken

De punt van de soldeerbout zal erg heet zijn! Wees voorzichtig bij het hanteren van de soldeerbout tijdens de werking ervan.

Houd de droge spons ingedrukt.

Terwijl de soldeerbout heet is, wrijft u over de spons om overtollig soldeer van de punt van de soldeerbout te verwijderen.

+[title] Clean the soldering iron
[* icon_caution] The soldering iron tip will be very hot! Be careful when handling the soldering iron during its operation.
-[* black] Hold down the dry sponge.
+[* black] Hold down the damp sponge.
+ [* icon_note] Use a damp sponge not a wet sponge so it won't burn. Also make sure the sponge is made from a cellulose material not a polymer. You don't want the sponge to melt and mess up your iron.
[* black] While the soldering iron is hot, use a rubbing motion across the sponge to remove excess solder off the soldering iron tip.
+[* black] When you have cleaned the iron, melt a small amount of solder on it to "re-tin" the tip.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.