Repareer je spullen Gemeenschap Winkel

Logitech MX Master 마우스 피트 교체

Terug naar de handleiding
Engels
Koreaans
Vorige stap

Stap 5 vertalen

Stap 5
Logitech MX Master Mouse Feet Replacement, Reassembly information: stap 0, afbeelding 1 van 3 Logitech MX Master Mouse Feet Replacement, Reassembly information: stap 0, afbeelding 2 van 3 Logitech MX Master Mouse Feet Replacement, Reassembly information: stap 0, afbeelding 3 van 3
Reassembly information

  • For installing new mouse feet or reusing your old ones:

  • Use a pair of tweezers or a spudger to remove any large chunks of leftover adhesive.

  • Thoroughly clean the bottom of the mouse with isopropyl alcohol and a lint-free or microfiber cloth. Allow the surface to dry completely.

  • Peel your new mouse feet away from their adhesive liners and press them firmly into place.

재조립 정보

새 마우스 피트를 설치하거나 기존 마우스 피트를 재사용할 때 참고하세요:

핀셋이나 스퍼저를 사용하여 남은 접착제 덩어리를 제거하세요.

이소프로필 알코올과 보푸라기가 없는 극세사 천으로 마우스 바닥을 깨끗이 닦으세요. 표면이 완전히 마를 때까지 기다리세요.

새 마우스 피트를 접착 라이너에서 떼어내고 제자리에 단단히 눌러 고정하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.