Ga door naar hoofdinhoud

Cómo descargar un condensador en grandes máquinas

Stap 2
How to Discharge a Capacitor in Large Machinery, Discharge the capacitor: stap 0, afbeelding 1 van 2 How to Discharge a Capacitor in Large Machinery, Discharge the capacitor: stap 0, afbeelding 2 van 2
Discharge the capacitor
  • Don't touch the two wire leads together during this step, as this could short circuit the capacitor.

  • Lay one wire lead on the head of the terminal.

  • While holding the lead in place, lay the other wire lead on the opposite terminal to complete the circuit.

  • Hold this position for a few seconds or until the lightbulb completely darkens.

No toques los dos cables durante este paso, ya que esto podría provocar un cortocircuito en el condensador.

Coloca un cable conductor en la cabeza de la terminal.

Mientras sostienes el cable en su lugar, coloca el otro cable en el terminal opuesto para completar el circuito.

Mantén esta posición durante unos segundos o hasta que la bombilla se oscurezca por completo.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.