Ga door naar hoofdinhoud

Procedimento di Apertura (1° e 2° generazione)

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 2
Opening Procedure (1st and 2nd Gen), Heat the right edge: stap 0, afbeelding 1 van 1
Heat the right edge
  • Apply a heated iOpener to the right edge of the screen for two minutes.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the screen and/or internal battery, so proceed with care.

Applica un iOpener scaldato sul bordo destro dello schermo per circa due minuti.

Puoi anche usare un asciugacapelli, una pistola termica o una piastra elettrica, ma fai attenzione perché un estremo calore potrebbe danneggiare lo schermo e/o la batteria interna.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.