Ga door naar hoofdinhoud

iPhone 14 Plus リアガラスの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 6
iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: stap 0, afbeelding 1 van 3 iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: stap 0, afbeelding 2 van 3 iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Apply a suction handle to the bottom edge of the rear glass, while avoiding the very edge of the glass.

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the rear glass and the frame.

  • Insert an opening pick into the gap.

  • The adhesive holding the rear glass in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the rear glass up and down to weaken the adhesive until you create enough of a gap to insert your opening pick.

吸盤ハンドルをスクリーンガラスの端ぎりぎりを避けながら、少し開けた端付近に装着します。

吸盤カップをしっかりと一定の力で引き上げて、フレームとリアガラスの間にわずかな隙間を作ります。

隙間にオープニングピックを差し込みます。

スクリーンを固定している接着は非常に強力で、この最初の隙間を作るにはかなりの力が必要です。隙間が開きにくい場合は、再度熱を加え、スクリーンを上下に軽く揺すって粘着力を弱め、オープニングピックを差し込める程度の隙間を作ってください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.