Ga door naar hoofdinhoud

Apple Watch Series 7 스크린 교체

Stap 5
Apple Watch Series 7 Screen Replacement, Disconnect the display cables: stap 0, afbeelding 1 van 2 Apple Watch Series 7 Screen Replacement, Disconnect the display cables: stap 0, afbeelding 2 van 2
Disconnect the display cables
  • Use a pair of tweezers to pull both display cables out of the ZIF connectors.

  • Avoid pulling on the watch assembly, or you may rip the display cables.

  • If not damaged you can reuse the old tape during reassembly. Otherwise replace it with new tape.

핀셋을 사용하여 두 디스플레이 케이블을 ZIF 커넥터에서 분리하세요.

시계 어셈블리는 당기지 마세요. 아니면 디스플레이 케이블이 찢어질 수 있습니다.

디스플레이 케이블아 손상되지 않았다면 재조립할 때 원래 테이프를 재사용할 수 있습니다. 아니면 새 테이프로 교체하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.