Repareer je spullen Gemeenschap Winkel

Apple Watch Series 7 电池替换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Chinees
Stap 8
Apple Watch Series 7 Battery Replacement, Remove the battery: stap 0, afbeelding 1 van 1
Remove the battery

  • Remove the battery.

  • Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing your old battery during reassembly, you can reuse the existing adhesive to secure the battery during reassembly.

  • Secure a new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

移除电池

移除电池

请勿再次使用已变形或损坏的电池，否则存在安全隐患。 请更换新的电池。

如果在重新组装期间使用旧电池，则可以在重新组装期间重复使用现有的胶水来固定电池。

使用预切胶 或双面胶带固定新电池。 为了正确定位，将新胶带放在设备中旧胶带所在的位置，请勿直接粘在电池上。 将新电池用力按入到位。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.