Ga door naar hoofdinhoud

Apple Watch Series 7 배터리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 8
Apple Watch Series 7 Battery Replacement, Remove the battery: stap 0, afbeelding 1 van 1
Remove the battery
  • Remove the battery.

  • Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing your old battery during reassembly, you can reuse the existing adhesive to secure the battery during reassembly.

  • Secure a new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

배터리를 분리하세요.

손상 또는 변형된 배터리는 잠재적 안전 위험이 있으므로 재사용하지 마세요. 새 배터리로 교체하세요.

재조립 중에 기존 배터리를 재사용하는 경우 기존 접착제를 재사용하여 배터리를 고정할 수 있습니다.

양면 접착 테이프 또는 미리-자른 접착 테이프로 새 배터리를 고정하세요. 배터리를 올바른 위치에 놓으려면 새 접착제를 배터리에 직접 바르지 말고 기기의 이전 접착제가 있던 위치에 바르세요. 새 배터리를 제자리에 단단히 누르세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.