Repareer je spullen Gemeenschap Winkel

MacBook Pro 14" 2021 Vervanging van de onderste behuizing

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 54 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Nederlands
Stap 5
MacBook Pro 14" 2021 Lower Case Replacement, Release the sliding clips: stap 0, afbeelding 1 van 3 MacBook Pro 14" 2021 Lower Case Replacement, Release the sliding clips: stap 0, afbeelding 2 van 3 MacBook Pro 14" 2021 Lower Case Replacement, Release the sliding clips: stap 0, afbeelding 3 van 3
Release the sliding clips

  • Sliding clips along the back edge of the MacBook further secure the lower case. Separating these clips may require a lot of force—consider using gloves to protect your hands from the sharp edges of the lower case.

  • Firmly pull the lower case away from the back edge, one corner at a time, to disengage the sliding clips.

  • Keep the lower case flat to the MacBook. Don't pull upward until it's completely separated.

Vertaling hier toevoegen

Trek de onderste behuizing stevig richting de voorkant van de batterij (weg van de scharnieren) om de behuizing uit de greep van de laatste klemmen los te trekken.

Trek eerst de ene hoek en vervolgens de andere hoek weg.

Trek naar de zijkant, en niet omhoog.

Dit kan aardig wat kracht vereisen.

-[* black] Pull firmly to slide the lower case towards the front edge of the MacBook (away from the hinge area) to separate the last of the clips securing the lower case.
- [* black] Pull first at one corner, then the other.
- [* icon_caution] Pull to the side—not up.
- [* icon_note] This may require a lot of force.
+[title] Release the sliding clips
+[* icon_note] [link|https://guide-images.cdn.ifixit.com/igi/v54seXv6DBEyx6NM.huge|Sliding clips|new_window=true] along the back edge of the MacBook further secure the lower case. Separating these clips may require a lot of force—consider using gloves to protect your hands from the sharp edges of the lower case.
+[* black] Firmly pull the lower case away from the back edge, one corner at a time, to disengage the sliding clips.
+ [* icon_caution] Keep the lower case flat to the MacBook. Don't pull upward until it's completely separated.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.