Repareer je spullen Gemeenschap Winkel

Nintendo Switch OLED Model 실드 플레이트 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 3
Nintendo Switch OLED Model Shield Plate Replacement, Disconnect the primary Wi-Fi antenna: stap 0, afbeelding 1 van 2 Nintendo Switch OLED Model Shield Plate Replacement, Disconnect the primary Wi-Fi antenna: stap 0, afbeelding 2 van 2
Disconnect the primary Wi-Fi antenna

  • Use tweezers, or your fingers, to pull up and disconnect the primary Wi-Fi antenna's coaxial cable.

  • During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat end of a spudger. The connector should snap into place.

기본 Wi-Fi 안테나 연결 해제하기

핀셋 또는 손가락을 사용하여 기본 Wi-Fi 안테나의 동축 케이블을 당겨서 연결 해제하세요.

재조립할 때 다시 연결하기가 까다로울 수 있습니다. 한 번에 하나씩 각 커넥터를 소켓 위에 놓고 spudger/스퍼저의 평평한 끝으로 누르세요. 커넥터가 제자리에 끼워져야 합니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.