Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.
Stap 7 vertalen
Stap 7
Remove the back cover
-
Remove the back cover.
-
This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
-
Remove any adhesive chunks with a pair of tweezers or your fingers.
-
Use some high concentration (over 90%) isopropyl alcohol to wipe away any adhesive residue.
-
If you're using custom-cut adhesives, follow this guide.
-
If you're using double-sided tape, follow this guide.
[title] Remove the back cover | |
[* black] Remove the back cover. | |
[* icon_reminder] During reassembly: | |
[* black] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. | |
[* black] Remove any adhesive chunks with a pair of [product|IF145-020|tweezers] or your fingers. | |
[* black] Use some high concentration (over 90%) isopropyl alcohol to wipe away any adhesive residue. | |
- | [* black] If you're using |
+ | [* black] If you're using custom-cut adhesives, [guide|124003|follow this guide|new_window=true]. |
[* black] If you're using double-sided tape, [guide|113604|follow this guide.|new_window=true] |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.