Ga door naar hoofdinhoud

Jura Impressa S Model Thermoblock Replacement

Stap 7
Jura Impressa S Modelle Thermoblock  tauschen: stap 0, afbeelding 1 van 1
  • Ziehe die Kabel am Dampfboiler ab.

  • Wenn die beiden grün-roten Kabel hindern, kannst du sie am Stecker auf der Hauptplatine ablösen.

  • Je nach Modell können weitere Verbindungen vorhanden sein.

Disconnect the cables from the water boiler.

If the two green-red wires are interfering, you can disconnect them at the connector on the motherboard.

Depending on the model, other connections may be present.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.