Ga door naar hoofdinhoud

開口方法

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 11
Opening Procedure: stap 0, afbeelding 1 van 1
  • Reheat your iOpener and apply it to the top edge of the Surface's screen for two minutes.

  • The adhesive is thickest along this edge, and you may need to reheat and reapply the iOpener several times to get the tablet warm enough. Follow the iOpener instructions to avoid overheating.

  • You may also use a hair dryer, heat gun, or hot plate to heat the Surface.

  • Be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

  • Don't use a hot plate if the screen has been taped.

iOpenerを再度温めて、Surfaceスクリーン上端に2分間当てます。

この端に沿って接着剤が最も厚くなっているので、タブレットの接着剤を十分に温めるには、複数回に渡ってiOpenerを再加熱する必要があるかもしれません。iOpenerの指示に従って、過熱しないようにしてください。

また、ヘアドライヤー、ヒートガン、ホットプレートなどを使ってSurfaceを加熱することもできます。

スクリーンや内蔵バッテリーは熱で損傷しやすいので、Surfaceを加熱しすぎないように注意してください。

スクリーンにテープが貼られている場合は、ホットプレートを使用しないでください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.