Ga door naar hoofdinhoud

開口方法

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 2
Opening Procedure, Heat the right edge of the screen: stap 0, afbeelding 1 van 1
Heat the right edge of the screen
  • Heat an iOpener and apply it to the right edge of the Surface's screen for two minutes.

  • You may need to reheat and reapply the iOpener several times to get the tablet warm enough. Follow the iOpener instructions to avoid overheating.

  • You may also use a hair dryer, heat gun, or hot plate to heat the Surface.

  • Be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

  • Don't use a hot plate if the screen has been taped.

iOpenerを温めて、Surfaceスクリーンの右端に2分間当てます。

タブレットを十分に温めるためには、何度かiOpenerを温め直して貼り直す必要があるかもしれません。iOpenerの指示に従って、オーバーヒートを避けてください。

また、ヘアドライヤー、ヒートガン、ホットプレートなどを使ってSurfaceを加熱することもできます。

Surfaceのオーバーヒートにはご注意ください。スクリーンと内蔵バッテリーは熱によるダメージを受けやすいためです。

スクリーンの表面にテープを装着している場合は、ホットプレートは使用しないでください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.