Ga door naar hoofdinhoud

Procedura di apertura

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 2
Opening Procedure, Heat the right edge of the screen: stap 0, afbeelding 1 van 1
Heat the right edge of the screen
  • Heat an iOpener and apply it to the right edge of the Surface's screen for two minutes.

  • You may need to reheat and reapply the iOpener several times to get the tablet warm enough. Follow the iOpener instructions to avoid overheating.

  • You may also use a hair dryer, heat gun, or hot plate to heat the Surface.

  • Be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

  • Don't use a hot plate if the screen has been taped.

Scalda un iOpener ed appoggialo al bordo destro dello schermo del Surface per due minuti.

Potresti dover riscaldare e riappoggiare l'iOpener diverse volte per scaldare abbastanza il tablet. Segui le istruzioni dell'iOpener per evitare di surriscaldarlo.

Puoi usare anche un asciugacapelli, una pistola termica o una piastra scaldante per scaldare il Surface.

Stai attento a non surriscaldare il Surface: lo schermo e la batteria interna sono facilmente danneggiabili dal calore eccessivo.

Non utilizzare una piastra scaldante se hai applicato del nastro adesivo allo schermo.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.