15寸微软 Surface Laptop 3 电池更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Engels

Chinees

Stap 7 vertalen

Stap 7

Slide the card out from under the middle cell group.
Leave the card that's underneath the left group in place for now.
Slide the plastic card underneath the far right battery cell group to slice through the adhesive holding it to the case.
Wiggle the card from side to side as you insert it under the battery cells to fully separate all adhesive holding them in place.
Leave the plastic card temporarily underneath the right cell group to prevent it from re-adhering while you continue.

将卡从中间电池单元组下方滑出。
暂时将左侧组下方的卡片留在原位。
将塑料卡滑到最右侧的电池组下方，以切开将其固定在外壳上的粘合剂。
将卡插入电池单元下方时，左右摆动卡，以完全分离将它们固定到位的所有粘合剂。
将塑料卡暂时放在正确的单元格组下方，以防止在继续操作时它重新粘附。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.