Ga door naar hoofdinhoud

LG UD501KOJ5 Dehumidifier Sensor Replacement

Engels
Nederlands
Stap 2
LG UD501KOJ5 Dehumidifier Sensor Replacement: stap 0, afbeelding 1 van 2 LG UD501KOJ5 Dehumidifier Sensor Replacement: stap 0, afbeelding 2 van 2
  • Using your Phillips #0 screwdriver, remove the two screws which are attached at the bottom of the front grille.

  • Lift the front grille up and off the front of the frame, carefully set it in front of the dehumidifier.

  • The control board wire harness is still attached to the back of the front grille.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.