Ga door naar hoofdinhoud

iMac M1 24インチの分解

Stap 5
iMac M1 24" Teardown: stap 0, afbeelding 1 van 3 iMac M1 24" Teardown: stap 0, afbeelding 2 van 3 iMac M1 24" Teardown: stap 0, afbeelding 3 van 3
  • Huzzah! The M1 iMac still uses the classic iMac adhesive—it's not quite the goopy iPad nightmare that we feared.

  • We don't love glued-together desktops—but if you insist, then this sort of split-friendly foam adhesive has been our go-to recommendation since we first encountered it in the 2012 iMac. It carves open easily with our handy-dandy cutting wheel.

  • It's not all familiar though. The surprisingly shallow cutting action is disconcertingly bumpy—fortunately, our pizza cutter is just rolling over a series of protective plastic screw posts, nothing delicate.

  • Unlike on past iMacs, it has a single piece of glass—no metal chin to block access to internals. Good slack in the cables and no booby traps!

  • We can't wait to take a look at those radiator-looking bits—could they be speaker chambers?

やったー!M1 iMacには、従来のiMac用接着剤が使用されており、私たちが心配していた粘着性の高いiPadの悪夢がよみがえることはありませんでした!

私たちは接着剤で固められたデスクトップは好きではありませんが、どうしても接着剤を使用しなければならない場合は、このような簡単に剥がれるフォーム接着剤を支持します。2012 iMacの登場以来、推奨してきました。そして、便利なカッティングホイールで簡単に切り離せます

しかし、全てが同じとは行きません。ローラーを回すと何か下に当たっているような感覚があり、スムースなスライドができません。幸いなことに、このピザカッターは、保護用のプラスチック製スクリューポストの上を転がっているだけで、デリケートなパーツを破壊している訳ではありません。

これまでのiMacとは異なり、一枚のガラス構造です。つまり内部全体へのアクセスを妨げるシルバーメタル製の顎がありません。ケーブルに弛みが持たせてあり、ケーブルのトラップもありません。

このラジエーターのようなものは、スピーカーチャンバーなのでしょうか。早く確認したいです。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.