Ga door naar hoofdinhoud

iMac M1 24" Teardown

Stap 4
iMac M1 24" Teardown: stap 0, afbeelding 1 van 3 iMac M1 24" Teardown: stap 0, afbeelding 2 van 3 iMac M1 24" Teardown: stap 0, afbeelding 3 van 3
  • Our midrange unit comes with two Thunderbolt 4 ports and two regular USB-C ports. That's double the base model, but not much for a desktop. Maybe there's room internally for expansion?

  • But hey, if it's color options you're after, you're in luck—there are more of those than there are ports.

  • The circular power port looks like something out of the Matrix. Better take this iMac apart quick, before it learns kung fu.

  • The foot features a new model number: A2438 plus the unique EMC 3663, and touts "Made in Thailand."

  • Historically iMacs were assembled in China, while a few were built in the States. China may be on the outs due to recent tensions (and tariffs).

  • The M1 iMac is two iPads thin—not deep enough for a headphone jack, so Apple turned its jack sideways to fit.

Unser Mittelklasse-Gerät besitzt zwei Thunderbolt 4-Anschlüsse und zwei normale USB-C-Anschlüsse. Das ist zwar das Doppelte wie beim Basismodell, für einen Desktop allerdings nicht besonders viel. Vielleicht gibt es im Inneren noch Platz für Erweiterungen?

Aber Hallo, wenn dir die Farbauswahl wichtig ist, hast du Glück — es gibt mehr Farben als Anschlussmöglichkeiten.

Der kreisförmig Anschluss für den Netzstrom erinnert an Etwas aus Matrix. Stelle den iMac besser etwas zur Seite, bevor er Kung-Fu lernt.

Der Fuß trägt eine neue Modellnummer: A2438 sowie die eindeutige EMC 3663, und wirbt mit "Made in Thailand".

Früher wurden iMacs in China zusammengebaut, einige wenige in den USA. China kommt möglicherweise durch die neuerlichen politischen Spannungen (und Zölle) ins Hintertreffen.

Der M1 iMac ist so dünn wie zwei iPads — das ist nicht tief genug für eine Kopfhörerbuchse, damit sie hineinpasst hat Apple sie seitlich eingebaut.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.