Ga door naar hoofdinhoud

如何使用屏幕虎钳夹

Stap 5 vertalen

Stap 5
How To Use Screen Vise Clamps: stap 0, afbeelding 1 van 3 How To Use Screen Vise Clamps: stap 0, afbeelding 2 van 3 How To Use Screen Vise Clamps: stap 0, afbeelding 3 van 3
  • Repeat the previous steps for the five remaining vise clamps: one at each of the four corners, and one in the middle of each long edge.

  • For larger tablets, more than six vise clamps may be needed to ensure the adhesive bonds evenly around the entire perimeter.

  • Using a hair dryer or heat gun, evenly heat the edges all the way around the device until they are slightly too hot to touch. The heat will help the adhesive form a more complete bond.

  • Don't overheat the device, or you may cause the battery to ignite or damage other heat-sensitive components, like the display.

  • While the device is still hot, tighten all six vise clamps down one full turn.

  • Don't tighten any further to avoid damaging your device.

  • Leave the vise clamps in place for about thirty minutes.

对其余五个虎钳进行重复上述步骤:在四个角中的每个角上一个,在每个长边的中间一个。

对于较大的平板电脑,可能需要六个以上的虎钳,以确保粘合剂在整个周边均匀粘结。

使用吹风机或热风枪,均匀加热设备周围的边缘,直到边缘变得有点热到无法触摸为止。热量将帮助粘合剂形成更完整的粘合。

请勿使设备过热,否则可能导致电池着火或损坏其他热敏组件,例如显示屏。

当设备仍然很热时,将所有六个虎钳夹向下拧一整圈。

不要再拧紧任何东西,以免损坏设备。

将虎钳夹放在适当的位置约三十分钟。

[* black] Repeat the previous steps for the five remaining vise clamps: one at each of the four corners, and one in the middle of each long edge.
[* icon_note] For larger tablets, more than six vise clamps may be needed to ensure the adhesive bonds evenly around the entire perimeter.
[* black] Using a hair dryer or heat gun, evenly heat the edges all the way around the device until they are slightly too hot to touch. The heat will help the adhesive form a more complete bond.
[* icon_caution] Don't overheat the device, or you may cause the battery to ignite or damage other heat-sensitive components, like the display.
[* black] While the device is still hot, tighten all six vise clamps down ***one full turn***.
[* icon_caution] Don't tighten any further to avoid damaging your device.
-[* black] Leave the vise clamps in place for about thirty minutes.
+[* black] Leave the vise clamps in place for about ***thirty minutes***.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.