Repareer je spullen Gemeenschap Winkel

Xbox Series X 中心机箱组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 17 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Volgende stap

Stap 1 vertalen

Stap 1
Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: stap 0, afbeelding 1 van 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: stap 0, afbeelding 2 van 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: stap 0, afbeelding 3 van 3
Disconnect the USB port cable

  • The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.

  • Use the flat end of a spudger to flip open the metal locking tab on the USB port ribbon cable.

  • During reassembly, gently snap the metal locking tab back into place once the cable has been inserted.

断开 USB 端口电缆

带状电缆及其接口非常脆弱，因此请始终轻轻打开锁定片并缓慢拉动电缆。

使用撬棒的平端翻转打开 USB 端口带状电缆上的金属锁定片。

在重新组装过程中，插入电缆后，轻轻地将金属锁定片卡回原位。

[title] Disconnect the USB port cable
-[* icon_note] The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.
+[* icon_caution] The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.
[* black] Use the flat end of a spudger to flip open the metal locking tab on the USB port ribbon cable.
[* icon_reminder] During reassembly, gently snap the metal locking tab back into place once the cable has been inserted.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.