Repareer je spullen Gemeenschap Winkel

iPhone 12 Pentalobe 나사 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans

Stap 1 vertalen

Stap 1
iPhone 12 Pentalobe Screws Replacement, Remove the pentalobe screws: stap 0, afbeelding 1 van 1
Remove the pentalobe screws

  • Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.75 mm long pentalobe P2 screws at the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Pentalobe/펜타로브/별나사 분리하기

주의: 시작하기 전에 iPhone 배터리를 25% 밑으로 방전하세요. 충전된 리튬-이온 배터리에 의도치 않은 실수로 구멍이 생기게 되면 화재를 일으키거나 폭발할 수 있습니다.

분해를 시작하기 전, iPhone 전원을 꺼주세요.

iPhone 하단 가장자리에 위치한 6.75mm 길이의 Pentalobe P2 나사 두 개를 푸세요.

iPhone 디스플레이를 열면 방수씰링이 손상됩니다. 이 단계를 수행하기 전, 교체용 봉인을 준비하거나 봉인 없이 iPhone을 재조립할 경우 iPhone이 액체에 노출되지 않도록 주의하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.