Repareer je spullen Gemeenschap Winkel

MacBook Pro 13" Touch Bar 2019 Vervanging van de batterij

Engels
Nederlands

Handleidingsbenodigdheden

Alle vooraf vereiste handleidingen moeten vertaald worden voordat deze vertaling volledig wordt beschouwd.

Uitschakelen van de Auto Boot

MacBook 13" Touch Bar 2018 Vervanging van de onderste behuizing

Loskoppelen van de batterij

Trackpad Prereq

MacBook Pro 13" Touch Bar 2018 Vervanging van de batterij

Handleidingsinformatie

= Klaar = Onvolledig
    Follow these instructions to replace the glued-in battery in your MacBook Pro using an iFixit kit with adhesive remover. The adhesive remover helps weaken the glue securing the old battery, making it easier to remove.
    '''***iFixit adhesive remover is flammable.'''*** Follow this procedure in a well-ventilated area, and don’t smoke or work near an open flame.
    '''***To minimize risk of damage, turn on your MacBook and allow the battery to fully discharge before starting this procedure.'''*** If a charged lithium-ion battery is accidentally punctured, a dangerous and uncontrollable fire may result. [[What to do with a swollen battery|If your battery looks puffy or swollen, take extra precautions|new_window=true]].
    '''***Note'''***: The solvent used to dissolve the battery adhesive can damage certain plastics. Follow all instructions and take care where you apply the adhesive remover.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some basic [[Troubleshooting Problems After a Repair|troubleshooting]] or search our [link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Touch%20Bar%202019|Answers community] for help.

      Stappen

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.