Repareer je spullen Gemeenschap Winkel

iPhone 12 mini 여는 절차

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 2
iPhone 12 mini Opening Procedure, Anti-Clamp instructions: stap 0, afbeelding 1 van 3 iPhone 12 mini Opening Procedure, Anti-Clamp instructions: stap 0, afbeelding 2 van 3 iPhone 12 mini Opening Procedure, Anti-Clamp instructions: stap 0, afbeelding 3 van 3
Anti-Clamp instructions

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

안티클램프 사용법

다음 세 단계는 여는 절차를 더 쉽게 하기 위해 고안된 도구 안티-클램프에 대한 설명입니다. 안티클램프를 사용하지 않는다면 세 단계를 건너뛰고 대안을 사용하세요.

안티클램프 사용법에 대한 전체 지침은이 안내서를 참고하세요.

안티클램프의 파란색 손잡이를 뒤로 당겨서 잠금을 해제하세요.

안티클램프 팔을 iPhone 왼편 또는 오른편 모서리에 맞추세요.

흡입 컵을 iPhone 하단 가장자리 근처에 배치하세요—하나는 전면에, 하나는 후면에.

컵을 함께 꽉 눌러서 원하는 부위에 부착하세요.

iPhone 표면이 너무 미끄러워서 안티클램프가 잘 붙지 않으면 테이프를 이용하여 접착 표면을 만들 수 있습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.