Ga door naar hoofdinhoud

Vanmoof S3 Vervanging van de belknop

Engels
Nederlands

Stap 9 vertalen

Stap 9
VanMoof S3 Bell Button Replacement, final report: stap 0, afbeelding 1 van 3 VanMoof S3 Bell Button Replacement, final report: stap 0, afbeelding 2 van 3 VanMoof S3 Bell Button Replacement, final report: stap 0, afbeelding 3 van 3
final report
  • That was not so hard at all. It took me 40 minutes. But to for the future i come prepared. I designed this protection caps for the buttons. You can get them 3d printed on my ebay.

  • Link to Ebay NO if will not upload this to Thingiverse.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.