Vanmoof S3 Vervanging van de belknop

Terug naar de handleiding

Engels

Nederlands

Stap 1 vertalen

Stap 1

VanMoof S3 Bell Button Replacement, Screwing around.: stap 0, afbeelding 1 van 3

VanMoof S3 Bell Button Replacement, Screwing around.: stap 0, afbeelding 2 van 3

VanMoof S3 Bell Button Replacement, Screwing around.: stap 0, afbeelding 3 van 3

Screwing around.

In my case the button was glued additionally. Cut around it to make it loose.
Use the 2mm hex screwdriver and remove the tiny screw on the side of the bell housing.
Use the pliers to unscrew the button. Screw to the left.
You can't break what is already broken. It should come off easily, so keep cool. Although, in my case, the button top broke off.
Don't forget to turn off the bike!

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.