Ga door naar hoofdinhoud

2018年款带 Touch Bar 的13寸 MacBook Pro 电池更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 16
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 1 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 2 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 3 van 3
Apply adhesive remover
  • Apply a few drops of adhesive remover under each of the remaining three battery cells.

  • There are openings in the aluminum case underneath these cells, so some of the adhesive remover may leak out instead of penetrating underneath the battery.

  • Be mindful of leaks, and apply more adhesive remover in the following steps if needed.

  • Wait about two minutes before you continue.

在剩余的三个电池单元中的每一个下面都涂几滴粘合剂去除剂。

这些电池下方的铝制外壳中有开口,因此某些除粘剂可能会漏出而不是渗入电池下方。

注意泄漏,如果需要,请在以下步骤中使用更多的胶水去除剂。

等待约两分钟,然后再继续。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.