Ga door naar hoofdinhoud

Sostituzione batteria MacBook Pro 13" Touch Bar 2018

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 16
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 1 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 2 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 3 van 3
Apply adhesive remover
  • Apply a few drops of adhesive remover under each of the remaining three battery cells.

  • There are openings in the aluminum case underneath these cells, so some of the adhesive remover may leak out instead of penetrating underneath the battery.

  • Be mindful of leaks, and apply more adhesive remover in the following steps if needed.

  • Wait about two minutes before you continue.

Applica poche gocce di antiadesivo sotto ciascuna delle tre celle rimaste della batteria.

Ci sono delle aperture nella scocca di alluminio sotto a queste celle, quindi una parte dell'antiadesivo potrebbe colare fuori invece di penetrare sotto la batteria.

Stai attento alle colature e, se necessario, applica dell'altro antiadesivo nei passi seguenti.

Aspetta un paio di minuti prima di continuare.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.