Ga door naar hoofdinhoud

Reemplazo de la batería de la MacBook Pro 13" 2018

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 16
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 1 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 2 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Apply adhesive remover: stap 0, afbeelding 3 van 3
Apply adhesive remover
  • Apply a few drops of adhesive remover under each of the remaining three battery cells.

  • There are openings in the aluminum case underneath these cells, so some of the adhesive remover may leak out instead of penetrating underneath the battery.

  • Be mindful of leaks, and apply more adhesive remover in the following steps if needed.

  • Wait about two minutes before you continue.

Aplica unas gotas de removedor de adhesivo debajo de cada una de las tres celdas de batería restantes.

Hay aberturas en la caja de aluminio debajo de estas celdas, por lo que parte del removedor de adhesivo puede salirse en lugar de penetrar debajo de la batería.

Ten cuidado con las fugas, y aplica más removedor de adhesivo en los siguientes pasos si es necesario.

Espera dos minutos antes de continuar.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.