Ga door naar hoofdinhoud

MacBook Pro 13" Touch Bar 2018 배터리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 8
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Open the adhesive remover: stap 0, afbeelding 1 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Open the adhesive remover: stap 0, afbeelding 2 van 3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Open the adhesive remover: stap 0, afbeelding 3 van 3
Open the adhesive remover
  • Pull off the black rubber stopper from your bottle of adhesive remover.

  • Twist to loosen or remove the bottle cap before you cut the applicator tip.

  • This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

  • Use scissors to cut off the sealed tip of the applicator.

  • Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

  • Twist and close the bottle cap securely before you proceed further.

접착제 제거제 병에서 검정색 고무 마개를 당겨 빼세요.

어플리케이터 끝을 자르기 전에 병 뚜껑을 돌려 풀거나 분리하세요.

이는 어플리케이터 끝을 자르기 전에 병의 봉인을 열고 압력을 균등하게 합니다. 만약 이 단계를 건너뛰면 팁을 자를때 접착제 제거제가 느닷없이 뿜어나올 수 있습니다.

가위를 사용하여 봉인된 어플리케이터 끝을 자르세요.

좁은 끝에 가깝도록 자르면 조절이 수월해져서 접착제 제거제를 소량으로 바를 수 있습니다.

더 진행하기 전에 병 뚜껑을 단단히 돌려 닫으세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.