Ga door naar hoofdinhoud

MacBook Pro 13" Touch Bar 2018 트랙패드 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 4
MacBook Pro 13" Touch Bar 2018 Trackpad Replacement, Heat the trackpad cable: stap 0, afbeelding 1 van 1
Heat the trackpad cable
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

iOpener를 준비하여 약 일 분 동안 트랙패드 리본 케이블 위에 놓고 트랙패드 리본 케이블을 배터리 상단에 고정하는 접착제를 부드럽게 하세요.

iOpener가 없는 경우, 헤어 드라이어를 사용하여 케이블을 데우세요. 케이블은 따뜻해야 하지만 만지기에는 너무 뜨겁지 않아야 합니다. 배터리가 과열되지 않도록 주의하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.