Ga door naar hoofdinhoud

Sostituzione trackpad MacBook Pro 13" Touch Bar 2018

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 4
MacBook Pro 13" Touch Bar 2018 Trackpad Replacement, Heat the trackpad cable: stap 0, afbeelding 1 van 1
Heat the trackpad cable
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

Prepara un iOpener e deponilo sopra il cavo a nastro del trackpad per circa un minuto, questo per ammorbidire l'adesivo che fissa il cavo a nastro del trackpad alla parte superiore della batteria.

Se non hai un iOpener, puoi usare un asciugacapelli per riscaldare il cavo. Il cavo deve essere caldo, ma non al punto da scottare se lo tocchi. Stai attento a non surriscaldare la batteria.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.