Ga door naar hoofdinhoud

Reemplazo del panel táctil de MacBook Pro 13" Touch Bar

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 4
MacBook Pro 13" Touch Bar 2018 Trackpad Replacement, Heat the trackpad cable: stap 0, afbeelding 1 van 1
Heat the trackpad cable
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

Prepara un iOpener y colócalo sobre el cable plano del panel táctil durante un minuto aproximadamente, para suavizar el adhesivo que sujeta el cable plano del panel táctil a la parte superior de la batería.

Si no tienes un iOpener, usa un secador de pelo para calentar el cable. El cable debe estar caliente, pero no demasiado caliente para tocarlo. Ten cuidado de no sobrecalentar la batería.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.