Ga door naar hoofdinhoud

Reemplazo del panel frontal del iPod Touch 7ma Generación

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
iPod Touch 7th Generation Front Panel Replacement: stap 0, afbeelding 1 van 3 iPod Touch 7th Generation Front Panel Replacement: stap 0, afbeelding 2 van 3 iPod Touch 7th Generation Front Panel Replacement: stap 0, afbeelding 3 van 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPod's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

Si el cristal de la pantalla está agrietado, mantenga la rotura contenida y evita daños corporales durante la reparación pegando el cristal con cinta adhesiva.

Pon tiras superpuestas de cinta adhesiva transparente sobre la pantalla del iPod hasta cubrir toda la cara.

Esto mantendrá los fragmentos de vidrio contenidos y proporcionará una integridad estructural al hacer palanca y levantar la pantalla.

Usa gafas de seguridad para proteger sus ojos de cualquier cristal que se haya sacudido durante la reparación.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.