Repareer je spullen Gemeenschap Winkel

Smontaggio Mac Pro 2019

Terug naar de handleiding
Engels
Italiaans
Stap 7
Mac Pro 2019 Teardown: stap 0, afbeelding 1 van 3 Mac Pro 2019 Teardown: stap 0, afbeelding 2 van 3 Mac Pro 2019 Teardown: stap 0, afbeelding 3 van 3

  • The feet are held in place with just one screw each—although the screws themselves are buried deep in slots in the space frame pillars, making them a bit awkward to access. We make do with a 4 mm hex key and a Mako driver for extra leverage.

  • The screws are held captive inside the frame, so you won't lose those, but we can't say the same for these feet. Better keep an eye on these things so they don't run away.

  • We didn't shell out the $400 for the wheel-y upgrade, so it's nice to know that we don't really need to drag this thing to the Apple store to swap its shoes.

  • If you're feeling adventurous and want to attach your own feet or wheels, the screws are M5x0.8. Since we can't remove them, we're unsure of their exact length, but we estimate 15-20 mm. They extend out about 4-4.5 mm from the bottom of the aluminum slab.

I piedini sono tenuti in posizione da una sola vite ciascuno. Certo, le stesse viti sono incassate profondamente nelle cavità degli elementi tubolari della scocca, rendendone un po' scomodo l'accesso. Ce la facciamo con una chiave a testa esagonale (una brugola, se preferite) da 4 mm associata a un'impugnatura Mako per avere una coppia maggiore.

Le viti restano imprigionate nella scocca, quindi non si possono perdere, ma lo stesso non si può dire per questi piedini. È meglio tenerli d'occhio, potrebbero rotolare via.

Non abbiamo sborsato i 400 dollari per le rotelle opzionali, perciò è bello sapere che non avremo davvero bisogno di trascinare faticosamente questa ingombrante cosa all'Apple store solo per cambiarle le scarpe.

[* black] The feet are held in place with just one screw each—although the screws themselves are buried deep in slots in the space frame pillars, making them a bit awkward to access. We make do with a 4 mm hex key and a Mako driver for extra leverage.
[* icon_note] The screws are held captive inside the frame, so you won't lose those, but we can't say the same for these feet. Better keep an eye on these things so they don't run away.
[* black] We didn't shell out the $400 for the [https://www.macrumors.com/2019/12/10/new-mac-pro-wheels-cost-400-dollars/|wheel-y upgrade|new_window=true], so it's nice to know that we don't ''really'' need to drag this thing to the Apple store to swap its shoes.
+[* icon_note] If you're feeling adventurous and want to attach your own feet or wheels, the screws are M5x0.8. Since we can't remove them, we're unsure of their exact length, but we estimate 15-20 mm. They extend out about 4-4.5 mm from the bottom of the aluminum slab.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.