Ga door naar hoofdinhoud

Remplacement du boitier avant du Sony Alpha A350

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 3
Sony Alpha A350 Front Case Replacement: stap 0, afbeelding 1 van 2 Sony Alpha A350 Front Case Replacement: stap 0, afbeelding 2 van 2
  • Open the flash on the top of the camera and remove two 4.3mm screws with a Phillips #00 screwdriver.

  • If the spring guard falls out during deconstruction, gently place the guard over the spring during construction.

  • To open the flash, simply press the button on the left side.

Ouvrez le flash sur le dessus de l'appareil photo et retirez deux vis de 4,3 mm avec un tournevis cruciforme n ° 00.

Si la protection du ressort tombe pendant la déconstruction, placez doucement la protection sur le ressort pendant la construction.

Pour ouvrir le flash, appuyez simplement sur le bouton sur le côté gauche.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.