Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 9 handleidingen die deze stap bevatten.

Stap 3
Hold onto your iPhone securely and close the handle of the iSclack to slightly separate the screen from the rear case of the phone. Don't try to completely separate the screen; a small opening along the bottom edge is all you need. Insert an opening pick into the gap under the display on the lower edge of the iPhone.
  • Hold onto your iPhone securely and close the handle of the iSclack to slightly separate the screen from the rear case of the phone.

  • Don't try to completely separate the screen; a small opening along the bottom edge is all you need.

  • Insert an opening pick into the gap under the display on the lower edge of the iPhone.

  • Skip the next two steps.

Tieni fermamente il tuo iPhone e chiudi il manico dell'iSclack per separare leggermente il display dal case posteriore del telefono.

Non provare a separare interamente il display; basta una piccola fessura lungo il bordo.

Inserisci un plettro di apertura nella fessura sotto lo schermo sul bordo inferiore dell'iPhone.

Salta i prossimi due passi.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.