Repareer je spullen Gemeenschap Winkel

Reemplazo del LCD y digitalizador del Huawei Honor 8

Terug naar de handleiding
Engels
Spaans
Stap 6
Huawei Honor 8 LCD & Digitizer Replacement: stap 0, afbeelding 1 van 1

  • Apply a heated iOpener to the display for two minutes to loosen the adhesive beneath.

  • You might need to reheat and reapply the iOpener several times during the removal procedure to get the adhesive warm enough to cut.

  • In the following step make sure to insert your opening pick in the gap between the display bezel and the screen during the removal procedure, not between the mid frame and the bezel.

Aplica un iOpener calentado a la pantalla durante dos minutos para aflojar el adhesivo que se encuentra debajo.

Es posible que tengas que volver a calentar y aplicar el iOpener varias veces durante el procedimiento de extracción para que el adhesivo se caliente lo suficiente como para cortarlo.

Mientras esperas, lee el siguiente paso para detalles adicionales.

[* black] Apply a [guide|25705|heated iOpener|new_window=true] to the display for two minutes to loosen the adhesive beneath.
[* icon_note] You might need to reheat and reapply the iOpener several times during the removal procedure to get the adhesive warm enough to cut.
-[* black] As you wait, read the next step for additional details.
+[* icon_caution] In the following step make sure to insert your opening pick in the gap between the display bezel and the screen during the removal procedure, not between the mid frame and the bezel.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.