Repareer je spullen Gemeenschap Winkel

MacBook Pro 13” Touch Bar Late 2016 로직 보드 어셈블리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 40
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Unscrew the logic board: stap 0, afbeelding 1 van 2 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Unscrew the logic board: stap 0, afbeelding 2 van 2
Unscrew the logic board

  • Remove all ten screws securing the logic board assembly:

  • Three 2.5 mm Torx T3 screws

  • Five 2.9 mm Torx T5 screws

  • Two 3.0 mm Torx T5 screws

  • During reassembly, install these screws loosely and adjust the logic board's position if necessary before tightening the screws.

로직 보드 풀기

로직 보드 어셈블리를 고정하는 나사 열 개를 모두 풀어주세요:

2.5mm Torx/톡스 T3 나사 세 개

2.9mm Torx/톡스 T5 나사 다섯 개

3.0mm Torx/톡스 T5 나사 두 개

재조립할 때, 일단 나사를 느슨하게 조이고, 필요하다면, 나사를 더 조이기 전에 로직 보드의 위치를 ​​조절하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.