Ga door naar hoofdinhoud

MacBook Pro 13” Touch Bar Late 2016 로직 보드 어셈블리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 7
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the Thunderbolt port screws: stap 0, afbeelding 1 van 2 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Remove the Thunderbolt port screws: stap 0, afbeelding 2 van 2
Remove the Thunderbolt port screws
  • Using a T3 Torx driver:

  • Remove two 1.4 mm screws from the Thunderbolt port connector bracket on the left.

  • Remove two more 1.4 mm screws from the Thunderbolt port connector bracket on the right.

T3 Torx/톡스 드라이버 사용:

왼편 Thunderbolt 포트 커넥터 브래킷에서 1.4mm 나사 두 개를 풀어주세요.

오른편 Thunderbolt 포트 커넥터 브래킷에서 1.4mm 나사 두 개를 더 풀어주세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.