Repareer je spullen Gemeenschap Winkel

华为 P20 Pro 显示屏更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Chinees
Stap 2
Huawei P20 Pro Screen Replacement: stap 0, afbeelding 1 van 1

  • Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough on all sides. Follow the iOpener instructions to avoid overheating.

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

准备iOpener，并将其应用于显示器至少两分钟，以软化下面的粘合剂。

你可能需要多次重新加热并重新使用iOpener，以使手机四面都足够温暖。按照 iOpener 说明操作以避免过热。

如果你的显示器玻璃破裂，请保持进一步的破损，并在修理过程中通过粘贴玻璃来防止人身伤害。

在显示器上放置重叠的透明包装带，直到整个面都被覆盖。

这将保持玻璃碎片包含，并在撬起和提升显示器时提供结构完整性。

戴上安全眼镜，以保护你的眼睛免受任何在修理过程中破碎溅起的玻璃。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.