Ga door naar hoofdinhoud

Huawei P20 Pro バッテリーの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 4 vertalen

Stap 4
Huawei P20 Pro Battery Replacement: stap 0, afbeelding 1 van 2 Huawei P20 Pro Battery Replacement: stap 0, afbeelding 2 van 2
  • Remove the battery.

  • Do not reinstall a damaged or deformed battery, as doing so is a potential safety hazard. Replace it with a new battery.

  • Before installing a new battery remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.

  • Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place for 5-10 seconds.

バッテリーを取り出します。

破損したり変形したバッテリーの再使用は絶対にしないでください。再使用すると潜在的な安全上の危険があります。 必ず、新しいバッテリーに交換してください。

新しいバッテリーを取り付ける前に、デバイスに残っている接着剤をすべて取り除き、イソプロピルアルコールと糸くずの出ないファイバークロスで接着部分をきれいに拭き取ります。

プレカットされた接着剤または両面テープを使って新しいバッテリーを固定します。 正しい位置に配置するには、バッテリーに直接、接着剤を貼るのではなく、古い接着剤が配置されていた位置に付けてください。接着剤を貼った後、 新しいバッテリーを所定の位置に5〜10秒間押して装着させます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.