Stap 3 vertalen
Stap 3
-
Insert the corner of an opening card into the crevice between the battery and the bottom midframe.
-
Pry the battery out of its recess using firm, constant pressure.
-
Try using an opening pick, an opening tool, or a spudger to pry the battery out. Do not use metal tools.
-
Repeat the adhesive remover/isopropyl alcohol application step and try again.
-
Try applying more heat with an iOpener.
[* black] Insert the corner of an opening card into the crevice between the battery and the bottom midframe. | |
- | [* black] Pry the battery out of its recess. |
+ | [* black] Pry the battery out of its recess using firm, constant pressure. |
[* icon_note] If the battery does not budge, the adhesive is not sufficiently weakened. | |
[* black] Try using an opening pick, an opening tool, or a spudger to pry the battery out. ***Do not use metal tools***. | |
[* black] Repeat the adhesive remover/isopropyl alcohol application step and try again. | |
[* black] Try applying more heat with an iOpener. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.