Ga door naar hoofdinhoud

Procédure d'ouverture de l'iPad Pro 10,5"

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 21 handleidingen die deze stap bevatten.

Stap 13
iPad Pro 10.5" Opening Procedure: stap 0, afbeelding 1 van 3 iPad Pro 10.5" Opening Procedure: stap 0, afbeelding 2 van 3 iPad Pro 10.5" Opening Procedure: stap 0, afbeelding 3 van 3
  • Slowly lift the display from its top edge, being careful not to strain the attached ribbon cables.

  • Remove the two 1.3 mm Phillips screws securing the display connector cover bracket.

  • You may need to angle the driver slightly in order to avoid straining the ribbon cables.

  • Remove the display connector cover bracket.

Soulevez lentement l'écran par son bord supérieur, en faisant attention à ne pas endommager les nappes.

Enlevez les deux vis cruciformes de 1,3 mm qui maintiennent le cache du connecteur de l'écran.

Vous devrez peut-être légèrement incliner le tournevis afin d'éviter d'abîmer les nappes.

Enlevez le cache du connecteur de l'écran.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.