Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 21 handleidingen die deze stap bevatten.
Stap 2 vertalen
Stap 2
-
Use a hair dryer or prepare an iOpener and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive underneath.
-
The bottom of the screen (near the home button) is held in place with strong adhesive.
-
As you start prying the screen off in the next stages, you may need to apply more heat to keep the glue warm and flexible.
| - | [title] Soften the adhesive with hair dryer |
|---|---|
| - | [* black] The bottom of the screen (near the home button) is held in place with strong adhesive. |
| - | [* black] Use a heat gun or hair dryer (low setting) to soften the adhesive. |
| + | [* black] [guide|157348|Use a hair dryer|new_window=true] or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive underneath. |
| + | [* red] The bottom of the screen (near the home button) is held in place with strong adhesive. |
| [* black] As you start prying the screen off in the next stages, you may need to apply more heat to keep the glue warm and flexible. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.