Ga door naar hoofdinhoud

Sostituzione batteria iPhone XR

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 6 vertalen

Stap 6
iPhone XR Battery Replacement: stap 0, afbeelding 1 van 1
  • Remove the battery from the iPhone.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Reinstall the Taptic Engine and speaker before installing a new battery. This helps keep the battery aligned correctly during installation.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the motherboard socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

Rimuovi la batteria dall'iPhone.

Se c'è ancora dell'alcol nel telefono, puliscilo attentamente o lascialo asciugare prima di reinstallare la batteria.

Rimetti al loro posto il Taptic Engine e l'altoparlante prima di installare la nuova batteria. In questo modo la batteria risulterà ben allineata.

Prima di incollare la batteria sostitutiva, collegala temporaneamente alla presa sulla scheda. Questo serve ad assicurarsi che la batteria sia posizionata correttamente.

Incolla la batteria, scollegala dalla scheda e procedi con il riassemblaggio.

Se la tua nuova batteria non ha l'adesivo già installato, segui questa guida per rimpiazzare le strisce adesive.

Effettua un riavvio forzato dopo il riassemblaggio. Questo eviterà diversi inconvenienti e semplificherà la risoluzione dei problemi.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.