Ga door naar hoofdinhoud

Sostituzione altoparlante inferiore iPhone XR

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 6
iPhone XR Lower Speaker Replacement: stap 0, afbeelding 1 van 1
  • Remove the five screws securing the lower speaker:

  • One 2.8 mm standoff screw

  • Standoff screws are best removed using a dedicated standoff driver or driver bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 2.3 mm standoff screw

  • One 2.3 mm Phillips screw

  • One 1.8 mm Phillips screw

  • One 1.6 mm Phillips screw

Rimuovi le cinque viti che fissano l'altoparlante inferiore:

Un distanziale a vite da 2,8 mm

Per rimuovere distanziali a vite l'ideale è usare un apposito cacciavite per distanziali o una punta rimovibile dello stesso tipo.

In caso di emergenza, può bastare un piccolo cacciavite a taglio, ma è necessaria un'estrema cautela per evitare che scivolando possa danneggiare i componenti circostanti.

Un distanziale a vite da 2,3 mm

Una vite a croce Phillips da 2,3 mm

Una vite a croce Phillips da 1,8 mm

Una vite a croce Phillips da 1,6

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.