Ga door naar hoofdinhoud

Nintendo Switch Vervanging van de luidspreker

Engels
Nederlands

Handleidingsinformatie

= Klaar = Onvolledig
Loudspeaker
Speaker
Nintendo Switch LoudspeakerSpeaker Replacement
    Follow this guide to remove the left and right loudspeakers in a Nintendo Switch gaming console.
    Follow this guide to replace a nonfunctioning or faulty speaker in your Nintendo Switch game console. This guide details both the left and right speakers. If you’re replacing a faulty speaker because of normal wear and tear, it’s a good idea to replace both speakers for a balanced audio experience.
    The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.
    ***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste.
    ***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).
      Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
      To reassemble your device, follow these instructions in reverse order.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Nintendo%20Switch|Nintendo Switch Answers community] for help.

      Stappen

      Stap 1

      Trek de rechter luidsprekeraansluiting in een rechte beweging uit het contact op het moederbord.

      Stap 2

      Til de luidspreker vervolgens voorzichtig aan de kabels omhoog en trek deze vervolgens in een hoek van 45 graden weg om deze te verwijderen.

      Stap 3

      Stap 4

      Stap 5

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.