Repareer je spullen Gemeenschap Winkel

更换华为P10 Lite 带中框的显示屏组件

Terug naar de handleiding
Engels
Chinees
Vorige stap

Stap 10 vertalen

Stap 10
Huawei P10 Lite Display Assembly with Frame Replacement: stap 0, afbeelding 1 van 3 Huawei P10 Lite Display Assembly with Frame Replacement: stap 0, afbeelding 2 van 3 Huawei P10 Lite Display Assembly with Frame Replacement: stap 0, afbeelding 3 van 3

  • Use the flat end of a spudger to disconnect the interconnect cable and remove it.

  • Use tweezers to disconnect the antenna cable and remove it.

  • Remove the charging board with tweezers.

  • If you're having trouble whilst removing the charging board you can use an iOpener to loosen the adhesive beneath it.

  • Before reassembly check your new part for any components that might need to be transferred from the old one. Also check if new thermal pads (pink rubber-like gobs) need to be applied.

  • When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.

使用撬棒的扁平端断开互连电缆并将其卸下。

用镊子断开天线电缆并将其拆下。

用镊子取下充电板。

如果在卸下充电板时遇到问题，可以使用 iOpener 软化其下方的粘合剂。

在重组之前，请检查是否有可能需要从旧零件上转移的新零件。还要检查是否需要安装新的导热垫（粉红色橡胶状的颗粒物）。

重组手机时，请使用双面胶带或预先切割的胶条替换旧粘合剂。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.